![]() ![]() Once you have setup your Mach3 software and your UC100 drivers etc (As per the above videos) you will need the STEPCRAFT profile settings to import into Mach3. therefore the machine can be controlled on a laptop as as-well as a desktop. All the communication between Mach3 and the controller happens over USB communication and then the UC100 itself generates the motor signals for machine control. the UC100 is a full 6 axis motion controller. The UC100 is a lot more than just a parallel to USB converter. The UC100 will plug directly into the STEPCRAFT when a LPT card is loaded in the machine. The UC100 from CNC Drive allows you to control a CNC with your USB port. However - we do not recommend this as there are well known issues with LPT connection with Mach3.įor best results you need to have a USB motion controller. Once you have an LPT card in the machine you can connect the machine to a Desktop PC that also has a LPT output. The WinPC modules will not allow you to talk to Mach3. ![]() You need the STEPCRAFT machine configured with an LPT card - not with the WinPC cards.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |